Sony SRW-5000 Maintenance Manual page 126

[F7] (CAP REEL) key
This menu checks the following items by performing the same operations as the
adjusting menus from the [F3] (S REEL FG) to [F9] (T REEL TORQUE).
. If automatic adjustment is possible in each menu of the [F3] (S REEL FG) to
[F9] (T REEL TORQUE).
. If the adjustment data value obtained by the automatic adjustment is proper.
n
After exiting this menu, the adjustment data value will be returned to the original
value.
When actually performing the adjustment, execute the adjusting menu.
1. Press the [F7] (CAP REEL) key of the ALT SERVO CHECK menu to display
the CAPSTAN REEL CHECK menu.
2. Press the [SET] key.
. When the [SET] key is pressed, checking will be started.
. The message "Auto Checking..." will be displayed on the color display.
3. Check the checking result.
. When checking completes with no errors, the message "All OK!!" will be
displayed on the color display.
. When checking could not be performed or the displays of NG items are
displayed, refer to "For Automatic Adjustment Failure" on page 3-75.
4. To finish the check, press the [F10] (EXIT) key.
5. Press the [F10] (EXIT) key while pressing the [SFT] (SHIFT) key.
6. Press the [F10] (EXIT) key after the message "Check Complete" is displayed to
return to the ALT SERVO CHECK menu.
3-32
DRUM ALT SERVO CHECK MENU
F1
MOTOR
CAPSTAN REEL CHECK
REEL
F2
SHIFT
Press SET key.
PINCH
F3
PLG
S REEL
BRAKE
F4
T REEL CLEAN CAP
DIAG
BRAKE PLG REEL
ALT F5 F6 F7 F8 F9 F10
[SET]
ALT SERVO CHECK MENU
CAPSTAN FG DUTY
Auto Checking. . .
(omitted)
ALT SERVO CHECK MENU
Auto Check Complete
ALL OK!!
SRW-5000/5500
EXIT