Sony SRW-5000 Maintenance Manual page 164

2. ALT SERVO ADJUST Menu
To display the ALT SERVO ADJUST menu, press ALT
button in the SERVO ADJUST menu.
NVRAM ALT SERVO ADJUST
F1
CTL
CAPSTN
F2
GAIN
T REEL
F3
GAIN
TENSN
OFFSET
F4
RF SW RF SW
DIAG
POS SR POS HD
ALT F5 F6 F7
[F1] (NVRAM CTL) Key
Saves the servo system data adjusted in the ALT SERVO
ADJUST menu onto the NV-RAM.
[F2] (CAPSTN GAIN) Key
Performs the capstan QPL gain adjustment.
[F3] (T REEL GAIN) Key
Performs the T reel QPL gain adjustment.
[F4] (TENSN OFFSET) Key
Performs the S/T tension offset adjustments.
[F5] (RF SW POS SR) Key
Performs the RF switching position adjustment in HDCAM
SR format.
[F6] (RF SW POS HD) Key
Performs the RF switching position adjustment in HDCAM
format.
[F10] (EXIT) Key
Exits the ALT SERVO ADJUST menu and returns to the
ALT MAINTENANCE menu.
3-70
EXIT
F8 F9 F10
SRW-5500
[F1] (NVRAM CTL) Key
Saves servo system data adjusted in the ALT SERVO
ADJUST menu onto the NV-RAM.
m
. If the automatic adjustment is abnormal (if "Auto Adjust
Failure" is displayed), do not save the adjusted data.
. If the adjusted data is not saved in this menu, the data
returns to the previous data when the unit is powered
OFF.
Execution Procedure
1. In the ALT SERVO ADJUST menu, press the [F1]
(NVRAM CTL) key to display the NV-RAM CON-
TROL menu.
OTHERS CHECK
F1
NVRAM CONTROL
F2
F3
F4
DIAG
ALT F5 F6 F7
2. Select an operation for the adjusted data, using [(]/[)]
key.
NO OPERATON: Performs no operation.
SAVE ALL DATA: Saves adjusted data on the NV-
RAM. Normally select this
operation.
3. Press the [F10] (EXIT) key to save the adjusted data
to NV-RAM.
. When the saving of the adjusted data is completed,
the menu returns to the ALT SERVO ADJUST
menu.
NO OPERATION
SAVE ALL DATA
EXIT
F8 F9 F10
SRW-5000/5500