4. Removing the DT-47 Board
(1) Remove the remaining screw fixing the DT-
47 board.
(2) Remove the DT-47 board and shift it to the
arrow direction
Secure the space to remove the T tension
regulator assembly.
5. Removing the T Tension Regulator
Assembly
(1) Unfasten the harness clamp, then disconnect
the harness from the connector CN207 on the
TR-120 board.
(2) Remove the two screws and remove the T
tension regulator assembly in the arrow
direction.
5-72
Remove the DT-47 Board
PWH3 x 8
T tension regulator
assembly
TR-120 board
CN207
Remove the T Tension Regulator Assembly
PWH3 x 8
DT-47 board
Harness clamp
Harness
SRW-5000/5500