Sony SRW-5000 Maintenance Manual page 272

26. Reconnecting the Flexible Board
Reconnect the flexible board to the connector
CN220 on the DT-47 board and lock it.
27. Reconnecting the Harnesses
(1) Reconnect the harness to the connector of the
AT head assembly.
(2) Reconnect the harness to the connector of the
full-erase head.
(3) Reconnect the harness to the connector of the
CTL head.
28. Reattaching the Video Head Cleaner
Assembly
Reattach the video head cleaner assembly.
(Refer to steps 4 to 6 in Section 5-4.)
Adjustment after Replacement
29. Confirming the Cleaning Solenoid
Operation
Refer to Section 3-3-4.
[F6] (CLEAN PLG) of the ALT SERVO
CHECK menu
30. Performing the Tension Offset
Adjustment
Refer to Section 3-4-2.
[F4] (TENSN OFFSET) of the ALT SERVO
ADJUST menu
31. Confirming the Pinch Press Clearance
Refer to step 5 in Section 5-9.
32. Adjusting the Tape Running
Refer to Sections 6-2 to 6-12.
5-66
Harness
Harness
Full-erase head
CTL head
Flexible board
Connect the Flexible Board and the Harnesses
AT head assembly
Harness
DT-47 board
CN220
SRW-5000/5500