Sony SRW-5000 Maintenance Manual page 91
Hd digital
Hide thumbs
Also See for SRW-5000:
- Operation manual (202 pages) ,
- Installation manual (54 pages) ,
- Brochure & specs (12 pages)
Table of Contents
Advertisement
ERROR-22 POSITION BOTH DETECT
Description:
The L and S cassette positions of the reel table were detected simultaneously.
Detecting condition:
When the L and S position sensors detect the L and S cassette positions, respec-
tively at the same time.
Sub error message:
None
. S position sensor (PH203 on DR-508 board) trouble
Possible causes:
. L position sensor (PH204 on DR-508 board)) trouble
. Reel position input port (IC100 on DR-508 board) trouble
Protecting operation:
When an error occurs during cassette insertion, ejects the cassette, if possible.
Prohibits the cassette insertion.
ERROR-23 THREAD BOTH DETECT
Description:
The thread end and unthread end states were detected simultaneously.
Detecting condition:
When the thread end and unthread end sensors detect the thread end and un-
thread end states, respectively at the same time.
Sub error message:
None
. Thread end sensor (TR-120 board) trouble
Possible causes:
. Unthread end sensor (TR-120 board) trouble
. Thread end or unthread end input port (IC801 on SS-95 board) trouble
Protecting operations:
Ejects the cassette during cassette insertion or ejection.
Switches to the protection mode during tape threading/unthreading.
Stops the tape transport and switches to the rest state in cases except the above.
ERROR-24 DT HEAD ERROR
Description:
Malfunction of DT head was detected.
Detecting condition:
When the HDSR DT and HDCAM DT adjustments are abnormaly done.
Sub error message:
None
. Slip ring trouble
Possible causes:
. DT-47 board trouble
. DT head trouble
. Drum trouble
SRW-5000/5500
2-13
Advertisement
Table of Contents
