Sony SRW-5000 Maintenance Manual page 191

5. Press the [SET] key.
. The tape runs automatically in the following mode to start the adjustment.
REC ADJUST menu:
FWD PLL ADJUST menu:
REV PLL ADJUST menu:
Menus other than the above menus:
n
Be careful not to change the tape transport mode during automatic adjustment.
The adjustment cannot be performed correctly in other modes than the tape transport mode that was
set automatically.
To adjust all the channels automatically:
. Adjust all the channels in order. "OK" or "NG" is displayed as an adjustment result. When the
adjustment is completed, the message "Complete" is displayed.
To perform the adjustment for a specified channel:
. "OK" or "NG" is displayed on the right of the specified channel, and "Complete" appears.
To adjust all the channels automatically
NVRAM HDCAM-SR FORMAT RF ADJUST
F1
CTL
FMT
F2 NA : OK
SEL
NB : OK
NC : OK
ND : OK
F3
NE : OK
NF : OK
NG : OK
F4
NH : OK
ALL CH
DIAG
ADJ
ALT F5 F6
To cancel the adjustment halfway:
(1) Press the [F10] (EXIT) key
The message "Cancel the adjustment ?" is displayed.
DIAG
ALT
(2) Press the [F10] (EXIT) key while pressing the [SFT] (SHIFT) key, and then press the [F10]
(EXIT) key again to return to the VCA ADJUST menu.
To continue the adjustment, press the [F10] (EXIT) key only.
SRW-5000/5500
REC mode
FWD mode
REV mode
PLAY mode
VCA [Complete]
Rslt Rslt Rslt
AA1 : OK AC1 : OK
AB1 : OK AD1 : OK
AE1 : OK AG1 : OK
AF1 : OK AH1 : OK
AA2 : OK AC2 : OK
AB2 : OK AD2 : OK
AE2 : OK AG2 : OK
AF2 : OK AH2 : OK
CH EXIT
SEL
F7 F8 F9 F10
NVRAM RF ADJUST
F1
CTL
HDCAM-SR FORMAT RF ADJUST
FMT
Cancel the adjustment ?
F2
SEL
[F10]
[SFT]+[F10] : Yes
F3
F4
ALL CH CH
ADJ SEL
F5 F6 F7
To perform the adjustment for a specified channel
NVRAM
F1
CTL
FMT
F2
SEL
F3
F4
ALL CH
DIAG
ADJ
ALT F5 F6
: No
EXIT
F8 F9 F10
HDCAM-SR FORMAT RF ADJUST
VCA [Complete]
Rslt Rslt Rslt
NA : OK AA1 : – – AC1 : – –
NB : – – AB1 : – – AD1 : – –
NC : – – AE1 : – – AG1 : – –
ND : – – AF1 : – – AH1 : – –
NE : – – AA2 : – – AC2 : – –
NF : – – AB2 : – – AD2 : – –
NG : – – AE2 : – – AG2 : – –
NH : – – AF2 : – – AH2 : – –
CH EXIT
SEL
F7 F8 F9 F10
3-97