Sony SRW-5000 Maintenance Manual page 245

Removal
1. Removing the Video Head Cleaner
Assembly
Remove the video head cleaner assembly.
(Refer to steps 1 and 2 in Section 5-4.)
n
To remove the fixing screws of the capstan
motor, remove the video head cleaner assembly.
2. Opening the DR-508 Board
(1) Place the unit with its one side down to
remove the bottom plate.
(Refer to Section 1-3-2.)
(2) Disconnect the flexible board from each
connector on the reel motors.
n
Setting the reel tables at the S cassette
position will ease the operation.
(Refer to Section 5-1-3.)
(3) Fully loosen the three screws on the DR-508
board.
n
These screws should not be removed neces-
sarily.
(4) Open the DR-508 board in the arrow direc-
tion.
n
Open the board slowly so that excessive force
is not applied to the connected harnesses.
SRW-5000/5500
Screw Reel motor
Flexible
boards
Screw
Remove the Flexible Board
Open the DR-508 Board
Screw
Reel motor
DR-508 board
5-39