Sony SRW-5000 Maintenance Manual page 414

(2) HDCAM (SRW-5500 only)
1. Activate the ALT MAINTENANCE menu, and
display the RF ADJUST menu.
(HOME menu → [SFT] + [DIAG] → [SFT] + [F8]
→ [ALT] → [F7] → RF ADJUST menu)
(For the RF ADJUST menu, refer to Section 3-4-5.)
2. Press the [F1] (FMT SEL) key several times to select
the HDCAM.
3. Press the [F5] (REC ADJ) key to display the REC
ADJUST menu.
4. Insert the recording tape.
5. To execute the automatic adjustment for the recording
current, press the [F6] (ALL CH ADJ) key then press
the [SET] key.
. Message [Complete] will be displayed when this
adjustment is completed normally.
Saving the Data
n
Do not save the adjustment data if the automatic adjust-
ment was not completed properly.
6. Press the [F1] (NVRAM CTL) key to display the NV-
RAM CONTROL menu.
7. Select the "SAVE ALL DATA" by pressing the cursor
keys, then press the [F10] (EXIT) key to saving data.
. The message "Save Complete" will be displayed
when this data save is completed normally.
8. Eject the recording tape.
9. Exit the maintenance mode.
8-16
SRW-5000/5500