Sony SRW-5000 Maintenance Manual page 268

Preparation
1. Turn the power off and disconnect the power cord.
2. Remove the upper lid (front) assembly. (Refer to Section 1-3-1.)
3. Remove the cassette compartment. (Refer to Section 1-5.)
4. Open the AE-31H board. (Refer to figure in Section 5-1-2.)
Removal
1. Removing the Video Head Cleaner
Assembly
Remove the video head cleaner assembly.
(Refer to steps 1 and 2 in Section 5-4.)
2. Disconnecting the Flexible Board
Disconnect the flexible board from the connector
CN220 on the DT-47 board.
3. Disconnecting the Harnesses
(1) Disconnect the harness from the connector of
the AT head assembly.
(2) Disconnect the harness from the connector of
the full-erase head.
(3) Disconnect the harness from the connector of
the CTL head.
5-62
Harness
Harness
Full-erase head
CTL head
Flexible board
Disconnect the Flexible Board and the Harnesses
AT head assembly
Harness
DT-47 board
CN220
SRW-5000/5500