Table of Contents
Advertisement
FIGURE 3-1
3. Align the two parts of each adjustable mounting bracket with the double-angled
ear (A) in the correct position.
As shown in the following figures, one piece of the mounting bracket (B) is smooth
except for two captive screws that extend from the same side as the mounting ear.
The other piece of the mounting bracket (C) has two closed slots, and the end with
the longest slot has a double-angled ear (A). Depending on which rack is being used,
you position the double-angled end either towards the back or front of the array.
a. For a Sun StorEdge 72-inch expansion cabinet or a Sun Fire expansion cabinet,
position the double-angled end (A) of the slotted piece (C) at the back, with the
screws on the smooth piece (B) extending through the shorter slot of the slotted
piece (
38
Sun StorEdge S1 Array Installation and Maintenance Manual • April 2003
Attaching the Side Mount Brackets to the Array
).
FIGURE 3-2
Advertisement
Table of Contents
