Sun Microsystems StorEdge S1 Array Installation And Maintenance Manual page 88

2. Enter the cfgadm(1M) command with the -x remove_device option to remove
the disk.
The screen example shows the removal of disk c7::dsk/c7t13d0.
<sio@qame2-b>: cfgadm -x remove_device c7::dsk/c7t13d0
Removing SCSI device:
/devices/ssm@0,0/pci@1d,600000/pci@1/scsi@2/sd@d,0
This operation will suspend activity on SCSI bus: c7
Continue (yes/no)? y
SCSI bus quiesced successfully.
It is now safe to proceed with hotplug operation.
Enter y if operation is complete or n to abort (yes/no)? y
** physically removed c7t13 **
3. Enter the cfgadm(1M) command with the -al option again to show that the disk
has been removed.
The screen example shows that c7::dsk/c7t13d0 has been removed.
<sio@qame2-b>: cfgadm -al c7
Ap_Id
c7
c7::dsk/c7t10d0
c7::dsk/c7t11d0
c7::dsk/c7t12d0
c7::dsk/c7t14d0
c7::dsk/c7t1d0
c7::dsk/c7t2d0
c7::dsk/c7t3d0
c7::dsk/c7t4d0
c7::dsk/c7t5d0
c7::dsk/c7t6d0
c7::dsk/c7t9d0
70 Sun StorEdge S1 Array Installation and Maintenance Manual • April 2003
Type Receptacle
scsi-bus connected
disk connected
disk connected
disk connected
disk connected
disk connected
disk connected
disk connected
disk connected
disk connected
disk connected
disk connected
Occupant Condition
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown