Figure 2-5 Removing The Bottom Right Front Mounting Screws; Figure 2-6 Attaching The Floor-Mounting Brackets - Sun Microsystems StorEdge 6920 System Getting Started Manual

1. Remove the three mounting screws on the bottom right side of the front
(
FIGURE 2-5
the system.
FIGURE 2-5
2. Using a 7/16-inch ratchet wrench, attach the right floor-mounting brackets to the
front and back of the system (
removed.
FIGURE 2-6
18 Sun StorEdge 6920 System Getting Started Guide • May 2004
) and the three mounting screws on the bottom right side of the back of
Removing the Bottom Right Front Mounting Screws
FIGURE 2-6
Attaching the Floor-Mounting Brackets
) with the six mounting screws you just
Floor-mounting brackets