Battery Warning - Sun Microsystems StorEdge S1 Array Installation And Maintenance Manual

Hide thumbs Also See for StorEdge S1 Array:
Table of Contents

Advertisement

SELV Compliance
Safety status of I/O connections comply to SELV requirements.
Power Cord Connection
Caution – Sun products are designed to work with power systems having a
grounded neutral (grounded return for DC-powered products). To reduce the risk of
electric shock, do not plug Sun products into any other type of power system.
Contact your facilities manager or a qualified electrician if you are not sure what
type of power is supplied to your building.
Caution – Not all power cords have the same current ratings. Household extension
cords do not have overload protection and are not meant for use with computer
systems. Do not use household extension cords with your Sun product.
The following caution applies only to devices with a Standby power switch:
Caution – The power switch of this product functions as a standby type device
only. The power cord serves as the primary disconnect device for the system. Be sure
to plug the power cord into a grounded power outlet that is nearby the system and
is readily accessible. Do not connect the power cord when the power supply has
been removed from the system chassis.
The following caution applies only to devices with multiple power cords:
Caution – For products with multiple power cords, all power cords must be
disconnected to completely remove power from the system.

Battery Warning

Caution – There is danger of explosion if batteries are mishandled or incorrectly
replaced. On systems with replaceable batteries, replace only with the same
manufacturer and type or equivalent type recommended by the manufacturer per
the instructions provided in the product service manual. Do not disassemble
batteries or attempt to recharge them outside the system. Do not dispose of batteries
in fire. Dispose of batteries properly in accordance with the manufacturer's
instructions and local regulations. Note that on Sun CPU boards, there is a lithium
battery molded into the real-time clock. These batteries are not customer replaceable
parts.
Appendix B
Declaration of Conformity, Regulatory Compliance, and Safety Statements
111

Advertisement

Table of Contents
loading

Table of Contents