Cleaning The Sun Storedge S1 Array Screens; M To Clean The Front Bezel Screen; Figure 5-7 Pulling A Tether Until It Stops - Sun Microsystems StorEdge S1 Array Installation And Maintenance Manual

Cleaning the Sun StorEdge S1 Array
Screens
To ensure optimum performance from your array, clean the screens at the front and
back of the array periodically.
To Clean the Front Bezel Screen
M
1. Remove the front bezel.
See "Removing the Front Bezel" on page 11 if needed.
2. Pull one of the tethers towards you until the head of the tether stops it from
coming out of the hole in the chassis (
Pulling a Tether Until It Stops
FIGURE 5-7
).
FIGURE 5-7
Chapter 5 Maintenance Tasks 91