Huawei OceanStor VIS6000 Series Command Reference Manual page 93

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Function
To view the temperature of the controllers, consisting of the temperature on the air intake vent
and that on the air exhaust vent.
Format
showctrltemp [-c controller ID]
Parameters
Parameter
-c controller ID
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
Example
View the temperature of controller A and controller B.
VIS CLI:root>device>showctrltemp
=====================================================================
=====================================================================
*********************************************************************
Controller ID
0
1
Success : Command executed success.
System Response
The previous information is described as follows:
l
Issue 06 (2010-05-10)
You can view the temperature of the controllers by running the command showctrltemp.
You can view the temperature of a specified controller by running the command
showctrltemp -c controller ID.
Controller Temperature Information
In Temperature(C)
28
27
Controller ID: indicates the controller ID.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the controller
ID.
Out Temperature(C)
58
53
2 Commands
Value
The value options are 0 and 1.
They are described as follows:
0: indicates controller A.
l
1: indicates controller B.
l
2-61