Chgctrlip - Huawei OceanStor VIS6000 Series Command Reference Manual

2 Commands
Usage Guidelines
You can add an administrator or a guest and initialize the password of a user by running the
command adduser -l level -u user name -p password.
The VIS6000 supports up to 16 users concurrently, consisting of administrators and guests.
Example
Add an administrator whose user name is user1 and password is 123456.
VIS CLI:root>device>adduser -u user1 -l 1 -p 123456
Success : Command executed success.
System Response
None.

2.2.2 chgctrlip

Function
To configure the IP address of the management network interface on a controller.
Format
chgctrlip -c controller ID -i netport ID -ip IP address -m mask [-g gateway]
Parameters
Function
-c controller ID
2-8
CAUTION
Description
Specifies the controller ID.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Value
The value options are 0 and 1.
They are described as
follows:
0: indicates controller A
l
1: indicates controller B
l
System
Command Reference
Issue 06 (2010-05-10)