Huawei OceanStor VIS6000 Series Command Reference Manual page 129

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Parameter
-i interface id
-p port id
-ip ip
-m mask
Modes
Normal.
Level
Administrator level.
Usage Guidelines
You can set the IP address of the GE service port on a specified service interface corresponding
to a specified iSCSI interface module of a specified controller by running the command
chgiscsiip -c controller -i interface id -p port id -ip ip -m mask.
Example
Set the IP address of GE service port 1 on interface module 0 of controller A to 129.16.101.8
and the subnet mask to 255.255.255.0.
VIS CLI:root>server>chgiscsiip -c 0 -i 1 -p 1 -ip 129.16.101.8 -m 255.255.255.0
Success : Command executed success.
Issue 06 (2010-05-10)
Description
Specifies the ID of a
interface module.
Specifies the ID of an GE
service port.
Specifies the IP address of
the GE service port.
Specifies the subnet mask
of the GE service port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Commands
Value
The value options are 0, 1, and
2. They are described as follows:
0: indicates interface module
l
0.
1: indicates interface module
l
1.
2: indicates interface module
l
2.
The value options are 0, 1, 2, and
3. They are described as follows:
0: indicates service interface
l
0.
1: indicates service interface
l
1.
2: indicates service interface
l
2.
3: indicates service interface
l
3.
The value cannot be 0.0.0.0,
255.255.255.255, or 127.%.%.
%.
None.
2-97