Table of Contents
Advertisement
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Parameter
min
hour
day
mon
week
Modes
Normal.
Level
Administrator level.
Usage Guidelines
You can set the cyclical replication and view the information about the cyclical replication by
running the command vxsched [-e n start|stop] [-l] [-r n|all] [-i start|stop] [-q] diskgroup
rvg hostname|ip min hour day mon week.
Example
Example 1: Enable the cyclical replication and start it at 19:00 on each day. Copy the data from
source disk group testdg to replication volume group testrvg. The IP address of the disaster
recovery center is 192.168.0.13.
VIS CLI:root>server>vxsched -i start testdg testrvg 192.168.0.13 0 19 + + +
This command may cause long time elapse. Please wait...
SUCCESS
Example 2: Modify the cyclical replication configurations of copying the data from source disk
group testrvg to replication volume group testvrg. The IP address of the disaster recovery center
is 192.168.0.13.
VIS CLI:root>server>vxsched -e 2 stop testdg testrvg 192.168.0.13 0 8 + + +
This command may cause long time elapse. Please wait...
SUCCESS
System Response
None.
Issue 06 (2010-05-10)
Description
Specifies the period of the cyclical
replication in minutes.
Specifies the period of the cyclical
replication in hours
Specifies the period of the cyclical
replication in days.
Specifies the period of the cyclical
replication in months.
Specifies the period of the cyclical
replication in weeks.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Commands
Value
None.
None.
None.
None.
None.
2-167
Advertisement
Table of Contents
