Huawei OceanStor VIS6000 Series Command Reference Manual page 188

2 Commands
vxvol [-fqV] [-g diskgroup] [-m] [-r rvg] assoc rvg volume [primary_datavol]
vxvol [-fqV] [-g diskgroup] dis volume
vxvol [-fqV] [-g diskgroup] [-U usetype] [-o useopt] recover volume
vxvol [-faqV] [-g diskgroup] [-U usetype] [-o useopt] start volume
vxvol [-faqV] [-g diskgroup] [-U usetype] [-o useopt] startall
vxvol [-faqV] [-g diskgroup] [-U usetype] [-o useopt] stop volume
vxvol [-faqV] [-g diskgroup] [-U usetype] [-o useopt] stopall
Parameters
Parameter
-f
-q
-V
-g diskgroup
-r rvg
-m
rvg
volume
primary_datavol Specifies the name of the primary data.
-U usetype
-o useopt
2-156
Description
Specifies that the command must run.
Specifies that the command vxvol can wait for the vxconfigd
program if the program is not run or unavailable. If the parameter
is not specified and the vxconfigd program is unavailable, the
command vxvol may be interrupted unexpectedly .
Displays the information that may be called or transmitted by the
command vxvol.
Specifies the name of a disk group.
Specifies the name of the replication volume group.
Maps the data volume to the secondary replication volume. The
parameter is used when the name of the secondary data volume is
the same as that of the primary data volume.
Specifies the name of the replication volume group.
Specifies the name of a volume.
Specifies that the valid parameters specified by usetype must be
run.
Specifies that the specified valid parameters must be accepted by
the operation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Value
None.
None.
None.
None.
None.
None.
None.
None.
None.
None.
None.
Issue 06 (2010-05-10)