Huawei OceanStor VIS6000 Series Command Reference Manual page 84

2 Commands
Format
showpower [-c controller ID]
Parameters
Parameter
-c controller ID
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
Example
To view the status of all the power supplies.
VIS CLI:root>device>showpower
==============================================================================
==============================================================================
**************************************
* Controller ID
* Alarm Status
* Switch Status
* API/DPI Online Status
* Power Supply Type
**************************************
Success : Command executed successfully.
System Response
The previous information is described as follows:
l
2-52
You can view the status of all the power supplies on the controllers by running the command
showpower.
You can view the status of the power supply on a specified controller by running the
command showpower -c controller ID.
Controller ID: indicates the controller ID.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Description
Specifies the ID of the
controller where the power
supply is.
Power Info
**************************************
0 * * Controller ID
normal * * Alarm Status
on * * Switch Status
Online * * API/DPI Online Status
DCM * * Power Supply Type
**************************************
System
Command Reference
Value
The value options are 0 and
1. They are described as
follows:
0: indicates controller A.
l
1: indicates controller B.
l
1
Fault
Unknown *
Offline *
DCM
Issue 06 (2010-05-10)
*
*
*