Huawei OceanStor VIS6000 Series Command Reference Manual page 272

2 Commands
Parameters
Parameter
-c controller ID
-s status
Modes
Normal.
Level
Administrator level.
Usage Guidelines
You can enable the flow control function by running the command setflowmask -c controller
ID -s status.
Example
Enable the flow control function on controller A.
VIS CLI:root>test>setflowmask -c 0 -s 1
===========================
===========================
***************************
* Controller ID
* Current Status
* Current Level
***************************
Success : Command executed success.
System Response
The previous information is described as follows:
2-240
Description
Specifies the controller ID.
Specifies the status of data
flow.
Flow Control
0 *
off *
1 *
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Value
The value options are 0 and
1. They are described as
follows:
0: indicates controller A.
l
1: indicates controller B.
l
The value options are 0, 1,
and 2. They are described as
follows:
0: indicates the enabled
l
status.
1: indicates the disabled
l
status.
2: indicates the level of
l
flow control.
System
Command Reference
Issue 06 (2010-05-10)