Huawei OceanStor VIS6000 Series Command Reference Manual page 73

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Parameters
Parameter
-c controller id
-i serial port id
Modes
Normal.
Level
Guest level.
Usage Guidelines
You can view the information about a specified serial port on a specified controller by running
the command showserialport -c controller id -i serial port id.
Example
View the information about all the serial ports on controller A.
VIS CLI:root>device>showserialport -c 0
====================================================================
====================================================================
*********************************
* Controller ID
* Serial Port ID
* Type
* Baud(bps)
* Data bit
* Stop bit
* Parity bit
*********************************
Success : Command executed success.
System Response
The previous information is described as follows:
Issue 06 (2010-05-10)
Description
Specifies the controller
ID.
Specifies the ID of the
serial port.
Controller Serial Port Info
0 *
5 *
System *
115200 *
8 *
1 *
0 *
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
The value options are 0 and 1.
They are described as follows:
0: indicates controller A.
l
1: indicates controller B.
l
The value options are 5 and 6.
They are described as follows:
5: indicates the debugging
l
serial port of the system.
6: indicates the baseboard
l
management controller (BMC)
debugging serial port.
*********************************
* Controller ID
* Serial Port ID
* Type
* Baud(bps)
* Data bit
* Stop bit
* Parity bit
*********************************
2 Commands
0 *
6 *
BMC Debug *
115200 *
8 *
1 *
0 *
2-41