Showalmlight - Huawei OceanStor VIS6000 Series Command Reference Manual

2 Commands
System Response
The previous information is described as follows:
l
l
l
l
l
l
l

2.2.23 showalmlight

Function
To view the status of the alarm indicator on a controller.
Format
showalmlight [-c controller ID]
Parameters
Parameter
-c controller ID
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
2-32
Controller ID: indicates the controller ID.
South Bridge: indicates the south bridge.
8525: indicates the model of the chip.
North Bridge: indicates the north bridge.
Memory: indicates the memory. Each controller provides eight memory bars.
CPU: indicates the CPU. The VIS6300 is configured with one CPU. The VIS6600 is
configured with two CPUs.
The states of the voltage are Normal and Fault.
You can view the status of all alarm indicators on the controllers by running the command
showalmlight.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Description
Specifies the controller ID.
System
Command Reference
Value
The value options are 0 and
1. They are described as
follows:
0: indicates controller A.
l
1: indicates controller B.
l
Issue 06 (2010-05-10)