Table of Contents
Advertisement
2 Commands
Function
To add a host.
Format
addhost [-i host group ID] -n host name
Parameters
Parameter
-i host group ID Specifies the ID of the host group or the
-n host name
Modes
Normal.
Level
Administrator level.
Usage Guidelines
NOTE
When using the command, pay attention to the following points:
l
l
l
Example
Add host1 to the default host group.
VIS CLI:root>server>addhost -n host1
Success : Command executed success.
System Response
None.
2-82
Description
default host group that the host belongs to.
Specifies the name of a host. The name
contains 1 to 32 characters, consisting of
numbers, letters, underscores, and
hyphens. The first character cannot be a
hyphen.
You can create a maximum of 256 hosts in the system.
You can add a host to a default host group by running the command addhost -n host
name.
You can add a host to a specified host group by running the command addhost -i host group
ID -n host name.
Ensure that the host and its host group use the same OS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Value
The value ranges from 0 to 127.
None.
System
Command Reference
Issue 06 (2010-05-10)
Advertisement
Table of Contents
