Huawei OceanStor VIS6000 Series Command Reference Manual page 104

2 Commands
Function
To upgrade the firmware.
Format
updatefw [-force] -t update type -o operate type [-i host IP address -u user name -p
password] -f file
Parameters
Parameter
-force
-t update type
-o operate type
-i host IP address
-u user name
-p password
-f file
Modes
Normal.
Level
Administrator level.
Usage Guidelines
When using the command, pay attention to the following points:
2-72
Description
Specifies that the system
automatically upgrades the
firmware without any
confirmation.
Specifies the type of the
firmware to be upgraded.
Specifies the operation type.
Indicates the IP address of the
remote SFTP server.
Indicates the user name of the
remote SFTP server.
Indicates the user password
of the remote SFTP server.
Indicates the directory for
saving the upgrade file.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Value
None.
The value is 2 that indicates
the system software.
The value options are 1, 2,
and 3. They are described as
follows:
1: indicates upgrade.
l
2: indicates
l
synchronization.
3: indicates rollback.
l
None.
None.
None.
None.
System
Command Reference
Issue 06 (2010-05-10)