Huawei OceanStor VIS6000 Series Command Reference Manual page 90

2 Commands
Function
To view the information about the controllers, consisting of the ID, IP address, primary/
secondary status, running status, online status, software version, PCB version, PCB version of
the backplane, basic input output system (BIOS) version, operating system (OS) version, BMC
version, application software version, primary CPLD version, secondary CPLD version,
location, temperature, and voltage status of the controllers.
Format
showctrlinfo [-c controller ID]
Parameters
Parameter
-c controller ID
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
Example
View the information about controller A.
VIS CLI:root>device>showctrlinfo -c 0
==========================================================
==========================================================
**********************************************************
* Controller ID
* Controller IP
* Master
* Status
* Online
* Software Version
2-58
You can view the information about all the controllers by running the command
showctrlinfo.
You can view the information about a specified controller by running the command
showctrlinfo -c controller ID.
Controller Information
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Description Value
Specifies the The value options are 0 and 1. They
controller ID. are described as follows:
l
l
0
129.80.10.161
No
normal
Yes
VISV100R001C01
Command Reference
0: indicates controller A.
1: indicates controller B.
*
*
*
*
*
*
Issue 06 (2010-05-10)
System