Table of Contents
Advertisement
2 Commands
Parameter
-c controller
-i interface id
-p port id
-ip Dest IP address
-m Dest mask address
-g Dest gateway address
Modes
Normal.
Level
Administrator level.
Usage Guidelines
You can add a route to or delete a route from an iSCSI service interafce by running the command
chgiscsiroute. Before adding a route to an GE service port, you need to set the IP address of the
GE service port.
2-16
Description
Specifies the controller.
Specifies the ID of the
interface module.
Specifies the ID of an GE
service port.
Specifies the destination
IP address to be added to
the routing table of the GE
service port.
Specifies the subnet mask
of the destination IP
address segment.
Specifies the gateway of
the GE service port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Value
The value options are 0 and 1.
they are described as follows:
0: indicates controller A.
l
1: indicates controller B.
l
The value options are 0, 1, and
2. they are described as follows:
0: indicates interface module
l
0.
1: indicates interface module
l
1.
2: indicates interface module
l
2.
The value options are 0, 1, 2,
and 3. they are described as
follows:
0: GE service port 0.
l
1: GE service port 1.
l
2: GE service port 2.
l
3: GE service port 3.
l
None.
None.
None.
System
Command Reference
Issue 06 (2010-05-10)
Advertisement
Table of Contents
