Huawei OceanStor VIS6000 Series Command Reference Manual page 209

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Parameter
dbtype
Modes
Normal.
Level
Administrator level.
Usage Guidelines
You can start the host database backup mode by running the database name and the database
type and send IBC messages by running the command vxbackupbyname dbname dbtype.
Example
VIS CLI:root>server>vxbackupbyname db01 1
This command may cause long time elapse. Please wait...
nice, find lunid
nice, maped this lunid
nice, dg exist
nice, rvg exist
dg=vvrdg
vol=dvol
rvg=vvrrvg
name=db01
type=1
backup2oracle success
ibc msg send successfully!
System Response
The previous information is described as follows:
l
l
l
l
l
Issue 06 (2010-05-10)
dg: indicates the name of the disk group.
vol: indicates the volume name.
rvg: indicates the name of the replication volume group.
name: indicates the name of the database.
type: indicates the type of the database.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the type of the
database.
2 Commands
Value
The value options are 0, 1, 2,
3, 4, and –1. They are
described as follows:
0: indicates Oracle.
l
1: indicates Sqlserver.
l
2: indicates informix.
l
3: indicates db2.
l
4: indicates Sybase.
l
-1: indicates Other.
l
2-177