Huawei OceanStor VIS6000 Series Command Reference Manual page 68

2 Commands
Format
showmem [-c controller ID]
Parameters
Parameter
-c controller ID
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
Example
View the information about all memories.
VIS CLI:root>device>showmem
==========================================================
==========================================================
****************************
* Controller ID
* Capacity(M)
* Usage(%)
* Usage Limit(%)
****************************
Success : Command executed success.
System Response
The previous information is described as follows:
l
l
2-36
You can view the information about the memories on the controllers by running the
command showmem.
You can view the information about the memory on a specified controller by running the
command showmem -c controller ID.
Memory Info
0
1942 *
46
82
Controller ID: indicates the controller ID.
Capacity(M): indicates the memory size in MB.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Description
Specifies the controller ID.
****************************
* * Controller ID
* Capacity(M)
* * Usage(%)
* * Usage Limit(%)
****************************
Command Reference
Value
The value options are 0 and
1. They are described as
follows:
0: indicates controller A.
l
1: indicates controller B.
l
1 *
1942 *
42 *
82 *
Issue 06 (2010-05-10)
System