Huawei OceanStor VIS6000 Series Command Reference Manual page 201

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Function
To manage the VVR, consisting of creating a replication group, adding the disaster recovery
center, viewing the progress of the current replication, and viewing the information about the
current replication volume group.
Format
vradmin -g tdg createpri trvg datavol srlvol
vradmin -g tdg addsec trvg localhost remotehost
vradmin -g tdg -l repstatus trvg
vradmin -g tdg printrvg
Parameters
Parameter Description
-g tdg
trvg
datavol
srlvol
-l
localhost
remotehost Specifies the IP address or the name of the disaster recovery center.
Modes
Normal.
Level
Administrator level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
Issue 06 (2010-05-10)
Specifies the name of a disk group.
Specifies the name of the replication volume group.
Specifies the name of a data volume.
Specifies the name of a log volume.
Displays the information in "long" format.
Specifies the IP address or the name of the data recovery center.
You can create a primary replication volume group by running the command vradmin -g
tdg createpri trvg datavol srlvol.
You can add a host to the disaster recovery center by running the command vradmin -g
tdg addsec trvg localhost remotehost.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Commands
Value
None.
None.
None.
None.
None.
None.
None.
2-169