Huawei OceanStor VIS6000 Series Command Reference Manual page 63

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Parameters
Parameter
-c controller ID
Modes
None.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
Example
View the voltage status of all components on a controller.
VIS CLI:root>device>showctrlvoltage
==========================================================================
==========================================================================
************************************
* Controller ID
* South Bridge(V)
* Standby CPLD(V)
* 8525 1.5(V)
* 8525 1(V)
* North Bridge 1.25(V)
* North Bridge PCIE(V)
* North Bridge 1.8(V)
* Memory 1.5(V)
* Memory 1.8(V)
* Memory 0.9(V)
* CPU VTT 1.2(V)
* CPU0 (V)
* CPU1 (V)
* CPU PLL (V)
************************************
Success : Command executed success.
Issue 06 (2010-05-10)
You can view the voltage status of all components on a controller by running the command
showctrlvoltage.
You can view the voltage status of a specified component on a controller by running the
command showctrlvoltage -c controller ID.
Controller Voltage Information
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the controller ID.
************************************
0 * * Controller ID
Normal * * South Bridge(V)
Normal * * Standby CPLD(V)
Normal * * 8525 1.5(V)
Normal * * 8525 1(V)
Normal * * North Bridge 1.25(V)
Normal * * North Bridge PCIE(V)
Normal * * North Bridge 1.8(V)
Normal * * Memory 1.5(V)
Normal * * Memory 1.8(V)
Normal * * Memory 0.9(V)
Normal * * CPU VTT 1.2(V)
_ * * CPU0 (V)
Normal * * CPU1 (V)
Normal * * CPU PLL (V)
************************************
2 Commands
Value
The value options are 0 and
1. They are described as
follows:
0: indicates controller A.
l
1: indicates controller B.
l
1 *
Normal *
Normal *
Normal *
Normal *
Normal *
Normal *
Normal *
Normal *
Normal *
Normal *
Normal *
_ *
Normal *
Normal *
2-31