Huawei OceanStor VIS6000 Series Command Reference Manual page 246

2 Commands
Parameter
-c checkpoint
pause rlink
resume rlink
restore rlink
recover rlink
-i interval
status rlink
updates rlink
checkdelete rlink
Modes
Normal.
Level
Administrator level.
Usage Guidelines
vxrlink [-g diskgroup] [-r rvg] dis rlink is used to separate rlink from the replication volume
group.
vxrlink [-g diskgroup] [-r rvg] det rlink is used to add all rlink to the replication volume group
again.
vxrlink [-g diskgroup] [-r rvg] [-c checkpoint] pause rlink is used to halt rlink.
vxrlink [-g diskgroup] [-r rvg] resume rlink is used to restart rlink.
vxrlink [-g diskgroup] [-r rvg] -c checkpoint restore rlink is used to restore rlink.
vxrlink [-g diskgroup] [-r rvg] recover rlink
vxrlink [-g diskgroup] [-r rvg] [-i interval ] status rlink is used to check rlink status.
vxrlink [-g diskgroup] [-r rvg] updates rlink is used to upgrade rlink.
vxrlink [-g diskgroup] [-r rvg] -c checkpoint checkdelete rlink is used to delete the designated
checkpoint in the disaster recovery center.
2-214
Description
Recording the water mark of the SRL.
Halting rlink.
Restarting rlink.
Restoring rlink.
Repairing rlink.
Checking the interval of the rlink replication status.
Checking rlink status.
Upgrading rlink.
Deleting rlink.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Value
None.
None.
None.
None.
None.
None.
None.
None.
None.
Issue 06 (2010-05-10)