Huawei OceanStor VIS6000 Series Command Reference Manual page 78

2 Commands
Parameter
-i interface id
-p port id
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
l
Example
View the information about service interface 0 of interface module 0 on controller A.
VIS CLI:root>device>showifport -c 0 -i 0 -p 0
=================================================
=================================================
*************************************************
* Controller ID
* Interface ID
2-46
You can view the information about all the service interfaces on a specified controller by
running the command showifport -c controller id.
You can view the information about all the service interfaces of a specified interface module
on a specified controller by running the command showifport -c controller id -i interface
id.
You can view the information about a specified service interface of a specified interface
module on a specified controller by running the command showifport -c controller id -i
interface id -p port id.
Interface Port Info
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Description
Specifies the ID of an
interface module.
Specifies the ID of a
service interface.
0
0
Command Reference
Value
The value options are 0, 1, and 2.
They are described as follows:
0: indicates interface module
l
0.
1: indicates interface module
l
1.
2: indicates interface module
l
2.
The value options are 0, 1, 2, and
3. They are described as follows:
0: indicates service interface 0.
l
1: indicates service interface 1.
l
2: indicates service interface 2.
l
3: indicates service interface 3.
l
*
*
Issue 06 (2010-05-10)
System