Huawei OceanStor VIS6000 Series Command Reference Manual page 52

2 Commands
Function
To export the fault location information of the system.
Format
exportdebuginfo [-i host IP address -u user name -p password] -f file directory
Parameters
Parameter
-i host IP address Specifies the IP address of the remote SSH FTP (SFTP) server.
-u user name
-p password
-f file directory
Modes
Normal.
Level
Guest level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
l
l
NOTE
Example
Export the fault location information. The fault location file debug.tgz is stored in OSM/ISM/
CLI.
2-20
Description
Specifies the user name of the remote SFTP server.
Specifies the password of the remote SFTP server.
Specifies the directory for storing the fault location file.
The system automatically names the fault location file. To avoid file overwrite due to the
same file name, you are recommended to move the exported fault location file from the
specified directory to another directory.
Before running the command, ensure that the SFTP service is started on the remote SFTP
server.
You can export the fault location information to the remote SFTP server by running the
command exportdebuginfo -i host IP address -u user name -p password -f file
directory.
You can export the fault location information to a local computer by running the command
exportdebuginfo -f file directory.
The exported fault location file must be a TGZ file.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Value
None.
None.
None.
None.
Issue 06 (2010-05-10)