Table of Contents
Advertisement
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Command Reference
Parameters
Parameter
-f
-i host group ID Specifies the ID of the default host group
Modes
Normal.
Level
Administrator level.
Usage Guidelines
When using the command, pay attention to the following points:
l
l
l
Example
To delete host group hostgp01, do as follows:
1.
2.
Issue 06 (2010-05-10)
Description
When deleting a host group, you do not
need to enter the confirmation
information.
or a host group.
You can delete a host group by running the command delhostgp -i host group ID.
You can delete a host group without any confirmation by running the command
delhostgp -f -i host group ID.
You can obtain the ID of the default host group or a host group by running the command
showhostgp. For details about the command showhostgp, see
Run the command showhostgp to obtain the ID of hostgp1.
==========================================================================
==========================================================================
************************************
* Host Group ID
* Os Type
* Name
************************************
************************************
* Host Group ID
* Os Type
* Name
************************************
Success : Command executed success.
Based on the information printed above, you can see that the ID of hostgp1 is 3.
Run the command delhostgp to delete hostgp1.
VIS CLI:root>server>delhostgp -i 3
Are you sure to delete the Host Group, (y/n)?
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Host Group Information
************************************
0
*
* Host Group ID
Windows
*
* Os Type
Default Group *
* Name
************************************
************************************
2
*
* Host Group ID
Linux
*
* Os Type
HostGroup002
*
* Name
************************************
2 Commands
Value
None.
The value ranges from 0 to 127.
2.3.29
showhostgp.
1
Linux
HostGroup001
3
Windows
hostgp01
*
*
*
*
*
*
2-101
Advertisement
Table of Contents
