Removing Support Material - µ-Dimension BST 1200es User Manual

Removing Support Material

Breakaway Supports
WARNING:
breakaway supports.
Dimension BST 1200es uses breakaway supports. Removing breakaway support is a simple matter
of gently removing material by scraping, or twisting. Basic tools such as a pick or needle-nose
pliers can facilitate material removal from cavities.
Soluble Supports
WARNING:
supports.
When removing soluble supports by hand, wear LEATHER gloves.
When removing soluble supports with the soluble concentrate, wear RUBBER
gloves.
Dimension SST 1200es uses soluble supports - a water-based solution designed to allow you to
simply wash away the support material. Your part is left smooth and clean with the fine details
intact. The soluble support material can be removed by hand with relative ease, but is designed to
be dissolved off of your parts for hands-free part finishing.
Wear safety glasses and LEATHER gloves when removing
Wear safety glasses and LEATHER gloves when removing soluble
34