SIP User's Manual
5.6
Provisioning SRTP Crypto Offered Suites
This section describes how to configure offered SRTP crypto suites in the SDP.
To configure SRTP crypto offered suites:
1.
In the MG Tree, select the device.
2.
On the Tab bar, select SIP, and then click SIP Protocol; the 'SIP Protocol Definitions'
screen is displayed.
3.
Select the Authentication & Security tab; the 'Authentication & Security' screen is
displayed.
4.
From the 'SRTP Offered Suites' (SRTPofferedSuites) drop-down list, select one of the
following:
•
[0] All = All available crypto suites (default)
•
[1] AES_CM_128_HMAC_SHA1_80
•
[2] AES_CM_128_HMAC_SHA1_32
Version 5.8
Figure 5-5: Authentication & Security Screen
203
5. Element Management System (EMS)
September 2009