Suzuki UY125 Service Manual page 164

5-40 CHASSIS
• Apply SUZUKI SUPER GREASE "A" to the cable end and
brake lever pivot.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Apply SUZUKI SUPER GREASE "A" onto the handlebars
before installing the throttle grip.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Apply SUZUKI SUPER GREASE "A" to the throttle cable end
and cable drum.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Align the hole A on the handlebars with the hole B of the
throttle grip case.
• Tighten the throttle grip case screw.
HANDLEBAR LEFT SIDE PARTS
• Apply a handle grip bond onto the handlebars before installing
the handlebar grip.
. 39442-09D00: HANDLE GRIP BOND
• When remounting the rear brake holder onto the handlebars,
align the brake holder's mating surface with the punched
mark A on the handlebars and tighten the upper clamp bolt
first.
NOTE:
Be sure to face the "UP" mark B on the holder to the upside.
http://mototh.com