Suzuki UY125 Service Manual page 188

6-12 ELECTRICAL SYSTEM
AC/DC RECTIFIER
• Remove the frame cover assembly. (!5-11)
• Disconnect the AC/DC rectifier coupler.
• Remove the AC/DC rectifier 1.
Measure the voltage between the terminals using the multi-cir-
cuit tester, as indicated in the table below. If voltage is not within
the specified value, replace the AC/DC rectifier with a new one.
" 09900-25008: Multi-circuit tester set
) Tester knob indication: Diode test (*)
Y/W
Y/W
B/W 1.0 – 1.6
+
W/R
+
R
+1.4 V and more (tester's battery voltage)
NOTE:
If the tester reads 1.4 V and below when the tester probes are
not connected, replace its battery.
+ Tester probe
B/W W/R
+
1.0 – 1.6
+
+
+
0.9 – 1.4
http://mototh.com
Unit: V
R
+
+
0.9 – 1.4
B/W W/R
Y/W R