Engine Reassembly - Suzuki UY125 Service Manual

3-56 ENGINE

ENGINE REASSEMBLY

Reassemble the engine in the reverse order of disassembly.
Pay attention to the following points:
NOTE:
Apply engine oil to each running and sliding part before reas-
sembling.
#
* Make sure to coat the rotating and sliding sections
with engine oil.
* Care must be taken so that the drive belt, drive face
and driven face are completely free from oil and
grease.
CRANKSHAFT
• Mount the crankshaft into the right crankcase by pulling its
right end into the crankcase with the special tools.
$ 09910-32812: Crankshaft installer
09910-20116: Conrod holder
09911-11310: Attachment
#
Never fit the crankshaft into the crankcase by striking
it with a plastic hammer. Always use the special tool,
otherwise the crankshaft may be misaligned.
CRANKCASE
• Clean and degrease the crankcase mating surfaces (both sur-
faces) with a cleaning solvent.
• Fit the dowel pins 1 into the left crankcase.
• Install the shim 2. (!3-55)
http://mototh.com