5-48
CHASSIS
• Remove the brake cable plate 2.
• Remove the brake adjuster 3.
• Remove the brake cam lever nut and bolt 4.
• Remove the brake cam lever 5, brake lining wear indicator 6
and brake camshaft 7.
INSPECTION
BRAKE DRUM
Measure the brake drum I.D. to determine the extent of wear
and, if the limit is exceeded by the wear noted, replace the wheel
hub. The value of this limit is indicated inside the drum.
& Brake drum I.D.:
Service Limit: 130.7 mm
$ 09900-20101: Vernier calipers
BRAKE SHOE
Inspect the brake shoes for wear or damage. If any defects are
found, replace the brake shoes as a set.
%
Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.
REAR AXLE
Check the rear axle spline for damage or wear. If any abnormal
condition is noted, replace the rear axle shaft. (" 3-18,-59)
REAR WHEEL............................................................. "5-15
TIRE............................................................................. "2-15
SPOKE NIPPLES ........................................................ "2-16
http://mototh.com