Suzuki UY125 Service Manual page 122

4-14 FUEL AND LUBRICATION SYSTEM
• Install the pilot screw 1.
NOTE:
Turn in the pilot screw 1 until it lightly seats, then back it out the
counted number of turns. (!4-11)
%
Replace the removed O-ring with a new one.
• Install the gasket 2 to the starter body 3. (!4-11)
%
Replace the removed gasket with a new one.
• Install the gasket 4 to the float chamber body 5. (!4-10)
%
Replace the removed gasket with a new one.
• Reassemble the clip 6, ring 7 and washers 8. (!4-10)
• Fit the jet needle assembly and spring to the piston valve.
• Install the holder 9 by turning it clockwise with a screwdriver.
http://mototh.com