Brake Fluid Replacement; Brake Pad Replacement - Suzuki UY125 Service Manual

BRAKE FLUID REPLACEMENT

• Remove the front handlebar cover. ("5-5)
• Place the motorcycle on a level surface and keep the handle-
bars straight.
• Remove the master cylinder reservoir cap and diaphragm.
• Suck up the old brake fluid as much as possible.
• Fill the reservoir with new brake fluid.
* Specification and classification: DOT 4
• Connect a clear hose to the air bleeder valve 1 and insert the
other end of the hose into a receptacle.
• Loosen the air bleeder valve and pump the brake lever until
the old brake fluid is completely out of the brake system.
• Close the air bleeder valve and disconnect a clear hose. Fill
the reservoir with new brake fluid to the upper level of the res-
ervoir.
%
* Never reuse the brake fluid left over from previous
servicing and which has been stored for long peri-
ods of time.
* Bleed air from the brake system. ("2-14)

BRAKE PAD REPLACEMENT

• Remove the cap 1 and loosen the brake pad mounting pin
2.
• Remove the brake caliper 3.
http://mototh.com
CHASSIS 5-23