OIL SUMP FILTER
• Remove the oil sump filter cap 1 and oil sump filter 2.
BRAKE CAM LEVER
• Remove the rear brake cam lever 1, brake lining wear indica-
tor 2 and brake cam 3.
CRANKCASE
• Remove the crankcase bolts.
• Separator the crankcase into 2 parts, right and left with the
crankcase separating tool.
$ 09920-13120: Crankcase separating tool
NOTE:
* Fit the crankcase separating tool, so that the tool arms are in
parallel with the side of crankcase.
* The crankshaft component should remain in the left crankcase
half.
CRANKSHAFT
• Remove the crankshaft with the special tool.
$ 09920-13120: Crankcase separating tool
http://mototh.com
ENGINE
3-19