REASSEMBLY
• Reassembly the cylinder head cover in the reverse order of
disassembly. Pay attention to the following points:
• Install the breather cover gasket 1.
#
Replace the removed breather gasket with a new one.
• Tighten the breather cover bolts to the specified torque.
" Breater cover bolt: 10 N·m (1.0 kgf-m)
• Apply THREAD LOCK to the PAIR reed valve cover bolts and
tighten them.
% 99000-32050: THREAD LOCK "1342"
CYLINDER HEAD
#
Identify the position of each removed part. Organize
the parts in their respective groups (i.e., intake or
exhaust) so that they can be installed in their original
locations.
DISASSEMBLY
• Remove the cam chain tensioner 1.
• Remove the camshaft retainer 2.
http://mototh.com
ENGINE
3-21