Suzuki UY125 Service Manual page 99

• Install the washer 2.
• Tighten the cooling fan holder nut to the specified torque with
the special tool.
" Cooling fan holder nut: 33 N·m (3.3 kgf-m)
$ 09930-40113: Rotor holder
• Align the boss C of the cooling fan to the groove D of the
cooling fan holder.
• Tighten the cooling fan bolt to the specified torque.
" Cooling fan bolt: 10 N·m (1.0 kgf-m)
POSTON RING
• Install the spacer 1 into the oil ring groove first.Then, install
both side rails 2, one on each side of the spacer. The spacer
and side rails do not have a specific top or bottom when they
are new. When reassembling used parts, install them in their
original place and direction.
http://mototh.com
ENGINE 3-65