Suzuki UY125 Service Manual page 106

3-72 ENGINE
• Mount the starter motor 2 on the engine.
• Tighten the starter motor bolts to the specified torque.
" Starter motor mounting bolt: 10 N·m (1.0 kgf-m)
CRANKCASE TUBE GROMMET
• Install the crankcase tube grommet No.1 1 and No.2 2.
NOTE:
The boss A of the crankcase tube grommet faces front side.
CLUTCH COVER
• Install the dowel pins and new gasket 1.
#
Use a new gasket to the prevent oil leakage.
• Install the clutch cover and its bolts to the specified torque.
" Clutch cover bolt: 10 N·m (1.0 kgf-m)
KICK STARTER LEVER
• Install the kick starter lever and bolt to the specified torque.
" Kick starter lever bolt: 26 N·m (2.6 kgf-m)
http://mototh.com