Suzuki UY125 Service Manual page 91

• Apply sealant to the right crankcase.
, 99000-31110: SUZUKI BOND "1215"
#
* Coat the sealant evenly without break.
* Application of sealant must be performed within a
short period of time.
* Take extreme care not to let sealant enter into the oil
hole or bearing.
• Tighten the crankcase bolts to the specified torque.
" Crankcase bolt: 10 N·m (1.0 kgf-m)
NOTE:
* After the crankcase bolts have been tightened, make sure that
the crankshaft rotates smoothly.
* If the crankshaft does not rotate smoothly, try to free it by tap-
ping it with a plastic hammer.
OIL SUMP FILTER
• Clean the oil sump filter using compressed air.
• Fit a new gasket 1.
• Install the oil sump filter 2.
http://mototh.com
ENGINE 3-57