Suzuki UY125 Service Manual page 96

3-62 ENGINE
• With the other side of the chain engaged with the crankshaft
gear, install the oil pump assembly after applying THREAD
LOCK to the screw.
+ 99000-32110: THREAD LOCK SUPER "1322"
• Tighten the oil pump mounting screws to the specified torque.
" Oil pump mounting bolt: 8 N·m (0.8 kgf-m)
• Install the oil pump cover 2.
• Tighten the oil pump cover bolts to the specified torque.
" Oil pump cover bolt: 10 N·m (1.0 kgf-m)
MAGNETOROTOR
• Install the key 1.
NOTE:
Remove any grease from the tapered portion of the magnetoro-
tor and crankshaft.
• Install the magnetorotor 2 together with the starter clutch
gear 3.
• With the fixed drive face locked, tighten the magnetorotor nut
to the specified torque.
" Magnetorotor nut: 120 N·m (12.0 kgf-m)
$ 09930-40113: Rotor holder
http://mototh.com