Suzuki UY125 Service Manual page 95

• Install the fixed drive face 7.
• Install the kick starter 8.
• Install the washer 9 and nut 0.
#
Check that the fixed drive face is not fouled with
grease or other substance and if found, clean and
degrease completely.
Check that the parts are properly engaged with the
spline.
• With the fixed drive face locked, tighten the fixed drive face
nut to the specified torque.
" Fixed drive face nut: 50 N·m (5.0 kgf-m)
$ 09930-40113: Rotor holder
• Turn the fixed drive face A by hand, until the drive belt is
properly seated and both the drive and driven faces rotate
together smoothly and without slipping.
CAM CHAIN
• Install the cam chain 1.
OIL PUMP
• Install the cam chain 1 with the oil pump gear.
http://mototh.com
ENGINE 3-61